|
Advantages:
REPEATED
CLEANING: Graffiti can be removed many times without
the need to reapply the coating
BY
HAND: No special machinery is required. Graffiti is
removed by hand using the graffiti removal kit.
DIFFICULT
TO CLEAN AREAS: Because the graffiti is removed by hand
without the need for pressure washers, then the coating
can be used in areas where the use of machinery is difficult.
For example: stairwells, carpeted areas, busy areas
where people pass close by.
Disdvantages:
NOT
BREATHABLE: The coating can only be applied to dry surfaces
that do not suffer from any dampness.
CHANGES
APPEARANCE: The coating will change the appearance of
the surface. A primer coat can be used to minimise the
change.
|
Advantages:
BREATHABLE: The sacrificial system allows the surface
to 'breathe' making it suitable for older buildings
and for buildings and structures where dampness may
be a problem.
INVISIBLE:
The sacrificial system is invisible so can be used on
buildings and structures where any change to the surface
appearance is unacceptable (although it may dull polished
or gloss surfaces).
RAPID
GRAFFITI REMOVAL: A hot water pressure washer operating
at 90ºC is used to remove the graffiti. The water melts
the coating and washes the graffiti away with it.
Disadvantages:
HOT
WATER PRESURE WASHER REQUIRED:These can be hired or
it may be cheaper to hire a steam cleaning company -
removal takes only a few minutes so the cost will be
low.
RE-APPLICATION
NEEDED: The coating will need to be replaced following
the removal of graffiti. Only the area cleaned will
require the coating to be reapplied.
|
